Precast Concrete Joint Sealing for Panels, Cores and Stairs
Precast frames go up fast, and every panel-to-panel joint needs sealing before the building is weathertight. Our precast concrete joint sealing team keeps up with the frame and leaves straight, consistent lines.
- 3a/3bIPAF: scissor and boom lifts
- NVQ Level 2Sealant Applicator
- £10memployer’s liability cover
- 12sealant brands we work with
Precast joints are on show
On a precast building the sealant joints are part of the architecture. Long vertical and horizontal lines run across every elevation, and any wobble, colour change or patchy finish is obvious from the ground. Precast concrete sealant also does a hard practical job, keeping driven rain out of the joint and allowing each panel to move with temperature.
That is why we treat precast panel joint sealing as a finishing trade. Consistent joint depth, the right backing and careful tooling make the difference between a frame that looks engineered and one that looks patched.

Precast concrete joints, inside and out
We seal the full range of joints on precast and hybrid frames:
Wall and cladding panels
Vertical and horizontal external joints between precast wall panels and cladding units.
Stair and lift cores
Core wall joints inside and out, often sealed early so following trades can get in.
Stairs and landings
Joints between precast flights, landings and walls, finished neatly for occupied areas.
Car park structures
Precast wall and upstand joints on multi-storey car parks, sealed from MEWPs or towers.
Precast to in-situ
Junctions where precast elements meet in-situ concrete, steel or masonry.
Remedials
Cutting out and resealing failed precast joints on older buildings.
Wall panel joints at Blackpool and Guildford
Panel joints on big multi-storey structures are where our team spends much of its time. On the Multiversity Project in Blackpool (July to September 2026) we completed roughly 1,300 linear metres of vertical and horizontal wall joints. Each joint was lined with bond breaker tape, then sealed with Arbo MP20, a one-part modified polymer sealant, working from a cherry picker boom.
The Guildford train station multi-storey car park followed the same approach between September and November 2024: about 1,250 metres of precast wall joints, Arbo MP20 over bond breaker tape, and three types of access (boom lift, crane with man and basket, and scaffold tower) to reach every joint on the structure.
How a precast package runs
We plan precast jobs around the frame programme and the access available.
Walk the frame
We check joint widths, depths and panel faces against the drawings before we start.
Plan access
MEWP, boom, tower or scaffold, agreed with your site team and covered in our RAMS.
Prepare
Joint faces cleaned, primed where required, and backed with backer rod or bond breaker tape.
Seal and sign off
Sealant applied and tooled, then each elevation checked and handed over.
Working at height on precast frames
Precast joints are mostly sealed at height. Our director holds IPAF 3a/3b and SSSTS cards, and our team has had no RIDDOR incidents in 3 years. We carry £10m Employer’s Liability and £5m Public Liability cover, and RAMS are provided on request.

Choosing precast concrete sealant
Most precast joints suit a one-part modified polymer or low-modulus sealant with good adhesion to concrete. We also apply polyurethane and polysulphide sealants where the specification calls for them. We use and apply Arbo, Sika and Tremco products, choosing colours that match the panel finish.
Insured & pre-qualified
For homeowners, builders and main contractors.
- £10m Employer’s LiabilityInsurance cover
- £5m Public Liability & Professional IndemnityInsurance cover
- Constructionline Silver member

- NVQ Level 2Sealant Applicator
Over 20 years in construction
Products we use
Sealants and adhesives we use on site.
Brand names and logos are trademarks of their respective owners and are shown to identify products we use. No endorsement is implied.
Our work, reviews and related services
Rated 5.0 from 15 Google reviews. Homeowners, landlords and contractors review our sealant work on Google, and we are always happy to share photos of similar jobs before you book.
Related services: expansion and movement joint sealing, structural movement joint sealing, façade and curtain wall sealing, commercial mastic work.
Companies we’ve worked for
Precast manufacturers, housebuilders, main contractors and specialist firms.
Logos show companies we have worked for. They are not endorsements.
Precast joint sealing: common questions
What sealant do you use on precast concrete panels?
It depends on the specification and joint size. A one-part modified polymer sealant such as Arbo MP20 suits many precast wall joints, applied over bond breaker tape or backer rod.
Can you work from our MEWPs or crane?
Yes. We regularly work from boom lifts, cherry pickers, scaffold towers and a crane with man and basket, planned with your site team.
Are you precast concrete joint sealing contractors for multi-storey car parks?
Yes. Multi-storey car park wall joints are a large part of our precast work, as our Guildford train station car park project shows.
How far do you travel for precast work?
Precast packages take our team all over England: London and the South East, the Midlands, the East of England, the South, and as far as Lancashire for the Blackpool job.
Got a precast frame coming up?
Send the drawings and programme to office@pioneersealants.co.uk or call 01234 607 252. Our team will price the joints and plan the access with you.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed





















