Bathroom Resealing by Your Mastic Man in Bedford: Bath, Basin and Tile Silicone
Black, peeling or split silicone round a bath is more than an eyesore. Our team specialises in bathroom resealing for homeowners, landlords and property managers, and every joint is cut out, cleaned and sealed again from scratch.
Why bathroom silicone goes black, split and loose
Every bath, basin and tiled wall in a bathroom sits on a joint that moves. A full bath drops by a few millimetres, the room swings from cold to steamy and back, and soap and shower residue feeds mould along the edge of the bead. After a few years the silicone loses its grip, shrinks away from the tile and lets water run down behind the bath panel.
That is why a quick wipe with bleach never lasts. Mould on silicone usually grows into the sealant, so the only real cure is to remove it and start again. Our bathroom resealing does exactly that: we take out the old bead, treat the joint and apply new sanitary silicone with a clean, tooled finish.
Whether you call it bath sealant, bath silicone or bathroom sealant, the fix is the same. A good mastic man will replace bathroom silicone rather than layer new over old, and black mould on silicone is a sign the whole bead has to come out.
Every joint in the bathroom we can reseal
Most customers ring us about the bath, but a proper reseal covers the whole room. We reseal:
Bath to tiles
The long joint along the bath rim, plus the short ends where the bath meets the wall.
Basin and vanity
Basin to wall, basin to vanity top and the upstand behind taps.
Tiled corners
Internal corners where two tiled walls meet, which should be flexible sealant rather than grout.
Shower area
Screens, trays and enclosures, covered in detail on our shower tray and wet room sealing page.
Toilet and cistern
Pan base and cistern joints, see toilet and basin sealant.
Window reveals
The sealed joint round a bathroom window frame, inside the room.
How we reseal a bathroom, step by step
The finish you see is only as good as the preparation underneath, so most of our time goes into the steps before the new sealant goes on.
Cut out
Every trace of the old silicone is cut and peeled out, not sealed over.
Clean and treat
Soap scum, limescale and mould are cleaned off the tile and the bath edge.
Dry and mask
The joint is dried fully and masked so the new line is crisp and straight.
Seal and tool
Fresh anti-mould sanitary silicone is applied and tooled to a smooth, even bead.
Where a gap is wider than a normal bead, we use a backing strip so the sealant has the right depth to flex without tearing.
Silicone, colours and what to expect afterwards
For baths, basins and tiled walls we use a mould-resistant sanitary silicone, a proper anti mould sealant, which stays flexible where tiles and acrylic or steel meet. We use and apply Dow, Everbuild, Soudal, Bostik and Arbo products and choose the one that suits your surfaces. White is the most common, but we can match grey, black, clear or a tile colour from our sealant colour charts.
- Complete silicone removal before resealing, never sealed over
- A tidy, straight bead with no smears on the tile or the bath
- Advice on how long to leave the joint before the bath is filled or the shower is used
- A quick tidy of the area when we finish
Curing time depends on the product, so we tell you on the day exactly how long to keep the joint dry.
Homes, rentals and new bathrooms
We reseal bathrooms in family homes, flats, rented properties, care homes and hotels. Landlords and letting agents often book several bathrooms in one visit between tenancies, which saves return trips and keeps each property turning around quickly. Housebuilders use our team to finish bathrooms on new plots; see internal mastic for new builds.
Our team brings over 20 years in construction to the work, and we cover London, the South East, the Midlands, the East of England and the South. If bathroom resealing is part of a bigger refurbishment, we are happy to work alongside your tiler or plumber.
Insured & pre-qualified
For homeowners, builders and main contractors.
- £10m Employer’s LiabilityInsurance cover
- £5m Public Liability & Professional IndemnityInsurance cover
- Constructionline Silver member

- NVQ Level 2Sealant Applicator
Over 20 years in construction
Products we use
Sealants and adhesives we use on site.
Brand names and logos are trademarks of their respective owners and are shown to identify products we use. No endorsement is implied.
Your mastic man in Bedford and the surrounding towns
Pioneer Sealants is based in Bedford, and bathroom resealing is one of the jobs our team does most often for homeowners and landlords in Bedford, Kempston, Ampthill, Biggleswade, Sandy and the villages around them. We also travel across Bedfordshire, Hertfordshire, Buckinghamshire, Cambridgeshire, Northamptonshire and London.
See our mastic man in Bedford page for the full list of areas we cover, or send us a photo for a quick quote.
Our work, reviews and related services



Rated 5.0 from 15 Google reviews. Homeowners, landlords and contractors review our sealant work on Google, and we are always happy to share photos of similar jobs before you book.
Related services: shower tray and wet room sealing, toilet and basin sealant, tile sealant, sealant colour charts, our sealant cost guide.
Bathroom resealing: common questions
Why does the silicone round my bath keep going black?
Mould grows on soap residue and into the surface of old silicone, so wiping it rarely works for long. We remove the old bead completely, clean and dry the joint and reseal with mould-resistant sanitary silicone.
Can you put new silicone over the old?
No. New sealant does not bond to old silicone, so it peels and traps moisture. The old bead is always cut out first.
Do you need the bath to be empty?
The bath should be empty and dry. Some people fill the bath before sealing so the joint is at its widest, and we will talk you through the best approach for your bath when we visit.
How long before I can use the bath or shower?
It depends on the sealant we use. We tell you on the day how long to leave the joint, so you are never guessing.
Bathroom silicone past its best?
Tell us what the bathroom looks like and we will let you know what a reseal involves. Send a photo on WhatsApp, email office@pioneersealants.co.uk or call 01234 607 252, and we will tell you what is needed.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed










