Walk into any DIY shed and you’ll find a wall of white tubes, all promising to be the answer for your bath or shower. It’s no wonder people ask us which one is actually the best sealant for a bathroom.
We’re Pioneer Sealants Ltd, Bedford-based specialist sealant applicators with over 20 years in construction behind the company. Bathrooms, showers and wet rooms are a big part of our domestic work, so here’s the plain answer, plus what to look for on the label and the mistakes that make a good product fail early.
The short answer
For the joints around a bath, shower tray, basin and wet-area tiling, the best choice for most homes is a good-quality sanitary silicone: 100% silicone, made for wet areas, with a fungicide added to slow down mould growth. It stays flexible, it doesn’t mind being soaked every day, and it copes with the small amount of movement you get when a bath fills and empties.
That said, the “best” sealant is the one that suits the surfaces it’s going on. Natural stone, mirrors and some metals need a different type of silicone, and a joint that’s going to be painted needs something else entirely. More on that below.
What to look for on the label
- “Sanitary” or “bathroom and kitchen”. This tells you it’s made for wet areas and has a fungicide in it. General-purpose or “builders” silicone often doesn’t.
- 100% silicone. Some cheaper tubes are bulked out with fillers or oils. They can shrink, go hard and lose grip sooner.
- Cure type. Most bathroom silicones are acetoxy cure (the ones that smell of vinegar while they set). They grip well on ceramic tiles, glass and acrylic or steel baths. On natural stone, some metals and mirror backs, a neutral-cure silicone is the safer choice, because acetoxy types can mark or stain those surfaces.
- Colour. White and clear are the usual choices, but sanitary silicone also comes in greys, ivories, black and more, so it can be matched to tiles or grout. Our sealant colour charts show what’s available from the main manufacturers.
- The data sheet. A decent product has a technical data sheet online showing the surfaces it suits and how long it takes to cure.

What not to use around a bath or shower
- Decorator’s caulk (acrylic). It’s great for gaps around skirting and door frames that are going to be painted, but it isn’t made to sit in water. In a shower it softens, cracks and stains quickly.
- Grout in a corner or movement joint. Where the bath or tray meets the wall, or where two walls meet, the joint moves. Grout is rigid and will crack. That joint wants silicone.
If you want to understand the difference between these products in more detail, we’ve covered it in mastic vs silicone vs caulk.
Does “anti-mould” sealant stop mould for good?
Honestly, no. The fungicide in a sanitary silicone slows mould down, but it doesn’t make the joint immune. Mould needs moisture, warmth and something to feed on, such as soap and body residue, and a steamy bathroom with poor ventilation gives it all three. A good anti-mould silicone in a well-ventilated room, wiped down now and then, stays clean far longer.
Not every mark is mould either. If new white silicone has turned yellow, pink or grey, have a look at our guide on why silicone changes colour.
Why the product is only half the job
We see plenty of failed joints where the sealant itself was fine. What let it down was the way it went on:
- Getting all the old sealant off. New silicone won’t bond properly to old silicone or to a film of residue left behind.
- A clean, dry joint. Soap, limescale and moisture all stop the bond. A joint that’s been showered in that morning isn’t dry.
- Filling the bath first. A bath drops slightly when it’s full of water (and someone’s in it). Sealing it full means the joint isn’t stretched every time it’s used.
- The right size of bead. Too thin and it splits, too thick and it takes ages to cure and can sag. Wide or deep gaps may need backing first.
- Leaving it to cure. Follow the cure time on the data sheet before the shower goes back on (see how long silicone takes to dry).

Which sealant for which part of the bathroom?
- Bath, shower tray and basin to tiles: sanitary silicone, colour to suit.
- Marble, limestone and other natural stone: a neutral-cure, stone-safe silicone to avoid staining at the edges.
- Glass shower screens and enclosures: sanitary silicone that suits glass and the frame finish, applied where the screen maker says to seal it (usually the outside, so water can drain back into the tray).
- Skirting, door frames and ceiling gaps that will be painted: a paintable acrylic, not silicone. Silicone can’t be painted, as we explain in can you paint over silicone.
We use and apply products from the main manufacturers, including Dow (DOWSIL), Sika, Arbo, Bostik, Everbuild and Soudal, and we choose the product to suit each surface rather than using one tube for everything.
When to call in a professional
If you’re happy with a gun and some patience, resealing a bath yourself is a reasonable DIY job. It’s worth getting a professional in when water is already getting behind the joint, when the surfaces are natural stone or expensive tiles, when it’s a walk-in shower or wet room, or when you’ve resealed before and it keeps failing. Our bathroom resealing service covers all of that, with every job priced, planned and managed by Pioneer Sealants from start to finish.
FAQ
Is clear or white silicone better for a bathroom?
Neither performs better; it’s about looks. White suits most white sanitaryware. Clear can look good on glass, but it shows any dirt or mould underneath, so the joint has to be spotless first.
Can I put new silicone over old silicone?
We wouldn’t. It won’t bond well, it traps any mould underneath and the joint usually fails sooner. Strip it back and start clean.
Need a hand with your bathroom?
If your bath, shower or wet room needs resealing, call us on 01234 607 252, WhatsApp us on 07757 772 880 with a couple of photos, or get in touch online. We’re Bedford-based and work across the UK, and we’ll tell you honestly what your joints need.
Mastic and sealant work in London: we cover every London borough. See Mastic Man London or go straight to your area: North London · North-East London · East London · South-East London · South-West London · West London · Westminster & the City.
Insured & pre-qualified
For homeowners, builders and main contractors.
- £10m Employer’s LiabilityInsurance cover
- £5m Public Liability & Professional IndemnityInsurance cover
- Constructionline Silver member

- NVQ Level 2Sealant Applicator
Over 20 years in construction
Products we use
Sealants and adhesives we use on site.
Brand names and logos are trademarks of their respective owners and are shown to identify products we use. No endorsement is implied.
Got a joint that needs doing properly?
Call us, or send a few photos on WhatsApp for the quickest quote.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed
















