You’ve had the bath or shower resealed, it looked spotless on the day, and a few weeks later the bead isn’t quite white any more. Maybe it’s gone a bit yellow, maybe there’s a pink tinge in the corner of the tray, or maybe it just looks grey and dull. The first thought is usually “that’s mould”. Sometimes it is. Often it isn’t.
We’re Pioneer Sealants Ltd, Bedford-based specialist sealant applicators with over 20 years in construction behind the company. We reseal bathrooms, showers and kitchens across Bedfordshire, Northamptonshire and London, and this is one of the questions we get asked most. Discolouration has many causes, and the fix depends on which one you’ve got. Here’s how to tell them apart.
First, is it on the surface or in the sealant?
This is the quickest test. Wipe the bead with a damp cloth and a little washing-up liquid, then dry it.
- If the colour comes off or fades, it’s sitting on the surface. That’s usually soap scum, limescale, product residue or a surface film of bacteria. Good news: the sealant itself is fine.
- If the colour stays put, it’s in the sealant. That points to black mould that has grown into the silicone, or a reaction that has changed the colour of the material itself.
Black mould is covered in detail in our post on why shower silicone goes black. This post is about the other colours, the ones that catch people out on fairly new sealant.
Pink or orange: usually bacteria, not mould

A pink or orange slimy film, often in the corners of a shower tray or along the bottom of a bath, is very common. It’s generally a bacteria that loves damp, soapy surfaces, rather than mould. It lives on the surface, so it tends to wipe away.
What helps:
– Clean it off with a non-abrasive bathroom cleaner and rinse well.
– Dry the tray or bath edge after use, or at least squeegee it.
– Keep the extractor fan on, and running for a while after a shower.
It comes back if the conditions stay the same, but on its own it isn’t a reason to reseal.
Yellow: cleaners, sunlight or the wrong product
Silicone going yellow is usually down to one of these:
- Harsh or bleach-heavy cleaners used often, or left to sit on the bead. Some strong products can discolour silicone over time.
- Sunlight, for example a kitchen worktop joint under a window, or a bathroom with a big skylight.
- Nicotine, hair dye, fake tan and similar products that stain whatever they touch.
- A sealant that isn’t meant for the job. A general-purpose or decorator’s sealant used in a wet area doesn’t hold up the way a proper sanitary silicone does.
If it’s surface staining, a gentle clean may lift it. If the colour is in the material, it won’t clean out, and the only real fix is to cut it out and reseal.
Grey or dull: damp behind or under the bead

Grey, patchy silicone that looks “dirty from the inside” often means moisture is getting behind or under it. That can happen when a joint was sealed before it was fully dry, when the surface wasn’t completely clean, or when the bath or tray moves and the bead starts to lift. You might also see a dark line just under the surface.
This one is worth acting on. If water is getting behind the sealant, it can reach the wall, the floor or the ceiling below. Press gently along the bead. If it feels soft, lifts at an edge or you can see a gap, it needs replacing.
So when is it actually mould?
Mould on silicone usually shows as black or dark green spots, often starting in the corners and along the lowest edge, that don’t wipe away. Once it has grown into the sealant, no cleaner will fully remove it. You can lighten it, but it comes back, because it’s living in the bead.
An anti-mould sealant helps, but it isn’t magic. It slows mould down; it doesn’t beat a bathroom that never dries out. Ventilation and drying the surfaces still do most of the work.
How to keep new silicone white for longer
- Wait for the sealant to cure fully before using the shower or bath. Our guide on how long silicone takes to dry explains the timings.
- Clean it gently and regularly rather than scrubbing hard now and then.
- Rinse cleaners off; don’t leave them sitting on the joint.
- Run the extractor fan, open a window, and wipe down after use.
- Fix a dripping tap or leaking screen seal, so the bead isn’t sitting in water.
When a reseal is the right call

If the colour is in the sealant, the bead is lifting, or mould keeps coming back after cleaning, it’s time to strip it out and start again. Sealing over the top never works. Our bathroom resealing service covers the full job: removing the old sealant completely, cleaning and drying the joint, and resealing with a quality anti-mould sanitary silicone in a matching colour. We cover Bedford and the surrounding towns, and homes and rentals across the capital through our London mastic and sealant service.
FAQ
Why is my new silicone turning pink?
Usually a surface bacteria that thrives on damp, soapy surfaces. It normally wipes off. Better drying and ventilation stop it coming back so quickly.
Can you get mould out of silicone?
Surface staining, yes. Mould that has grown into the sealant can be lightened but not removed, so the lasting fix is to replace the bead.
Does bleach turn silicone yellow?
Strong, bleach-heavy cleaners used often or left on the joint can discolour some sealants over time. Rinse them off after cleaning.
Is anti-mould sealant worth it?
Yes, in bathrooms and kitchens we always use a sanitary silicone with mould resistance. It still needs good ventilation to do its job.
Not sure what you’re looking at?
Send us a photo and we’ll tell you honestly whether it needs a clean or a reseal. Call 01234 607 252, WhatsApp 07757 772 880, or send us a message. We’re open Monday to Friday 8:00 to 18:30 and Saturday 9:00 to 16:00.
Mastic and sealant work in London: we cover every London borough. See Mastic Man London or go straight to your area: North London · North-East London · East London · South-East London · South-West London · West London · Westminster & the City.
Insured & pre-qualified
For homeowners, builders and main contractors.
- £10m Employer’s LiabilityInsurance cover
- £5m Public Liability & Professional IndemnityInsurance cover
- Constructionline Silver member

- NVQ Level 2Sealant Applicator
Over 20 years in construction
Products we use
Sealants and adhesives we use on site.
Brand names and logos are trademarks of their respective owners and are shown to identify products we use. No endorsement is implied.
Got a joint that needs doing properly?
Call us, or send a few photos on WhatsApp for the quickest quote.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed
















