Pioneer Sealants: Mastic and Silicone Sealing Specialists
Sealant is the last trade on a job and the first thing people notice. With over 20 years in construction behind the company, we bring the same care to every joint, from a single bathroom to a full commercial building.
- Over 20years in construction
- £10memployer’s liability cover
- £5mpublic liability & professional indemnity
- 0RIDDOR incidents in 3 years
- 13sealant brands we use and apply
Who we are and what we do
At Pioneer Sealants Ltd, we are specialist sealant applicators delivering high-quality sealant work for domestic, commercial and industrial projects across London, the South East, the Midlands and East Anglia.
Working across London, the South East, the Midlands and East Anglia. Our team has worked across the building trades, so we understand what sits behind a joint: the materials either side of it, the movement it has to take, the weather it faces and the trades that follow. That knowledge is what turns a line of mastic into a joint that lasts.
We apply silicone, polyurethane, polysulphide and modified polymer sealants, and we choose the product to suit the joint rather than reaching for whatever is in the van. A sanitary silicone sealant in a shower, a low-modulus sealant on a movement joint, a modified polymer on precast concrete panels: each has its place, and getting that choice right is half the job.
The part of the job most people never think about is the part that keeps the water out.
A shower tray leaking into the ceiling below. Rain getting in round a new window. A movement joint torn open after one winter. These are the problems a good sealant contractor prevents, which is why we never cut corners on preparation, product or finish.
Domestic sealing: bathroom silicone, kitchens and windows
For homeowners, landlords and letting agents, we are the mastic man you call when the bath sealant has turned black, the shower has started leaking or the windows are letting in draughts.
Bathroom silicone is the job we are asked about most, and it matters more than it looks. We strip out the old sealant completely, clean and treat the surface, let it dry properly and apply a fresh sanitary-grade silicone sealant in a colour to suit your tiles and fittings. The same care goes into kitchen worktops, sinks and splashbacks, wet rooms and walk-in showers, and into window sealing and door perimeters on the outside of your home, where a failed joint lets in cold air and rain.
We protect floors and surfaces, work tidily and leave a clean, straight line you will be happy to look at every day.
Bathrooms & wet rooms
- Bath, shower and wet room resealing
- Shower trays and screens
- Basins, WCs and tiled upstands
Kitchens & interiors
- Kitchen worktops and sinks
- Splashbacks and upstands
- Skirting and floor edges
Windows & doors
- Window sealing, inside and out
- Door frame perimeters
- Conservatories and roof lights
Commercial and industrial sealant work
As a commercial sealant contractor, we work for main contractors, developers, facilities teams and fit-out companies on new builds, refurbishments and occupied buildings.
We price from drawings and specifications, supply RAMS on request and arrive with the right cards, access equipment and products for the job. Work in occupied buildings such as offices, schools, hospitals and retail units can be planned out of hours to keep disruption to a minimum, and we coordinate with site managers so the sealant goes in at the right stage of the programme.
Commercial & new build
- Movement and expansion joints
- Curtain walling, structural glazing and façades
- Window and door perimeter sealing
- Plot finishing for developers and main contractors
Industrial
- Warehouse floor and slab joints
- Concrete joint sealing on precast panels
- Hygienic, food-safe and clean-room sealing
- Air-tightness sealing
Specialist work
- Specified sealants to the manufacturer’s instructions
- Pools and leisure facilities
- Listed buildings (lime-compatible)
- Out-of-hours work
See all our sealant services · Areas: London · South East · Midlands · East of England
Concrete and precast joint sealing
Precast concrete buildings depend on their joints. Panel joints have to stay watertight while the structure moves with temperature, loading and settlement, which makes concrete joint sealing one of the most technical parts of our work.
Multiversity Project, Blackpool
Between July and September 2026 we sealed roughly 1,300 linear metres of vertical and horizontal wall panel joints on the multi-storey building at the Multiversity Project in Blackpool. Each joint was prepared and fitted with bond breaker tape, so the sealant bonds to the two faces of the joint only and can move freely, then sealed with Arbo MP20, a one-part modified polymer sealant. High-level joints were reached from a cherry picker boom.
Guildford train station multi-storey car park
Between September and November 2024 we sealed roughly 1,250 linear metres of vertical and horizontal wall joints on the multi-storey car park at Guildford train station, again using bond breaker tape and Arbo MP20. Access was by boom lift, by crane with man and basket, and by scaffold tower, depending on the elevation and the height of each joint.
Working at height is routine for us. Every access method is planned in our RAMS before we start, and our team holds IPAF training for powered access and mobile towers.
Sealing the new City of London law courts at Salisbury Square
We are currently sealing the external window frames on the new City of London law courts at Salisbury Square, just off Fleet Street.
Our work there is perimeter sealing around the external window frames, where the joint between frame and façade has to be weathertight, consistent and neat on every elevation. On a landmark public building every joint is inspected and every detail has to last. It is the same standard we bring to every project, whether we are working as a London sealant contractor on a major scheme or resealing a single bathroom.
Airport runways and concrete slab joints
We also seal airport runways and concrete slabs at airports, along with large slab joints on industrial and commercial floors.
Runway, pavement and slab joints take heavy loads, constant traffic and everything the weather can throw at them. Joints are cleaned out and prepared properly before sealing, and the sealant is chosen for the movement and exposure each joint will face. On flat concrete floor joints this can include Fosroc products where specified. This kind of work often has tight access windows, so we plan it carefully around the client’s operating hours.
Structural glazing and curtain walling
Glazed façades, curtain walling and structural glazing rely on their weather seals to keep a building dry.
We carry out weather sealing to curtain wall and glazing systems, glazing perimeter joints and window sealing on commercial buildings, working to the system specification and the sealant compatibility it requires. Joints are cleaned and primed as specified, backed with the correct backing rod or tape, and tooled to a consistent profile, so the finish looks as good from the street as it performs in the weather.
How we work: preparation, colour matching and a clean finish
Good sealant work is mostly preparation. Whether it is a bathroom or a façade, every job follows the same process.
Survey and specify
We look at the joint, the materials and the movement it needs to take, then choose the right sealant, primer and backing.
Prepare the joint
Old sealant comes out completely. Joints are cleaned, dried and primed where needed, with backer rod or bond breaker tape so the joint is the right depth and shape.
Match the colour
We match the sealant colour to tiles, frames, brickwork, stone or concrete from the manufacturers’ colour ranges, so the joint blends in rather than stands out.
Leave a clean finish
Every joint is tooled to a straight, consistent profile. We protect surrounding surfaces, clear up as we go and leave the site clean.
Health and safety, insurance and qualifications
Main contractors can put us straight on site, and homeowners get the same standard of care at home. Safety and paperwork are part of the job, not an afterthought.
Accreditation & insurance
- Constructionline SilverMembership no. 1405108
- SSIPThrough our Constructionline Silver membership
- £10m Employer’s LiabilityInsurance cover
- £5m Public LiabilityPublic liability and professional indemnity cover
Cards, training & site record
- NVQ Level 2Sealant Applicator
- IPAF 3a / 3bScissor and boom lifts
- SSSTSSite Supervisor Safety Training Scheme
- No RIDDOR incidentsIn the last three years
- RAMSRisk assessments & method statements on request
Pioneer Sealants Ltd is a limited company registered in England and Wales, company no. 12966331.
Insured & pre-qualified
For homeowners, builders and main contractors.
- £10m Employer’s LiabilityInsurance cover
- £5m Public Liability & Professional IndemnityInsurance cover
- Constructionline Silver member

- NVQ Level 2Sealant Applicator
Over 20 years in construction
Products we use
Sealants and adhesives we use on site.
Brand names and logos are trademarks of their respective owners and are shown to identify products we use. No endorsement is implied.
Sealant brands we use and apply
As an independent specialist sealant applicator, we are free to choose the right product for each joint.
We use and apply products from Arbo, Dow, Sika, Tremco, Bostik, Everbuild, EVT, Fosroc, Kerakoll, Ardex, Mapei, BAL and Soudal, including Arbo MP20 modified polymer sealant on precast concrete joints. We follow each manufacturer’s published guidance on preparation, priming and application, and we pick the product for the joint, not the other way round.
Brand names are trademarks of their respective owners and are named only to identify products we use and apply. We are not a manufacturer, stockist or approved partner of any brand, and no endorsement is implied.
The finish speaks for itself






Coverage: London, the South East, the Midlands and beyond
We take on commercial, industrial and domestic sealant work across London, the South East, the Midlands, the East of England and the South, for building sites, businesses and homeowners alike.
As a London sealant contractor we work regularly in the City and across Greater London, and our team travels to commercial and industrial projects further afield, as our concrete joint sealing in Blackpool shows.
- London
- City of London
- South East
- Midlands
- East of England
- South of England
- Bedfordshire
- Hertfordshire
- Buckinghamshire
- Cambridgeshire
- Northamptonshire
Talk to our team about your project
Whether it is bathroom silicone in a family home or concrete joint sealing across a multi-storey building, we would be glad to help. Call the office on 01234 607 252 or email office@pioneersealants.co.uk with drawings, a specification or a few photos of the job, and our team will get back to you.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed










