Multi-storey and deck car parks take a beating. Concrete expands in summer sun and shrinks on frosty nights, the structure flexes under traffic, and rainwater, salt and oil get into every gap. The joints that let the structure move are usually the first thing to fail. When car park movement joints go, you get water dripping onto cars on the level below, stained soffits, and in time damage to the concrete and steel itself.
We’re Pioneer Sealants Ltd, Bedford-based specialist sealant applicators with over 20 years in construction behind the company. We seal concrete, precast and slab joints on commercial and industrial jobs across Bedfordshire, Northamptonshire, London and the surrounding counties, and further afield on larger projects. Here’s a plain guide for main contractors, facilities managers and car park owners.
Movement joints, expansion joints: what’s the difference?
On site the two names get used for the same thing, and that’s mostly fine. Strictly speaking, an expansion joint is a full break through the structure that lets one section move away from the next. A movement joint is the wider family, including the joints between precast wall panels, stair cores and deck slabs, and the control joints cut into a slab so it cracks where you want it to.
In a car park you’ll usually find:
- Joints between precast wall panels, vertical and horizontal, on the façade, stair towers and lift cores.
- Deck and slab joints across the parking levels and ramps.
- Structural expansion joints where one part of the building meets another.
Some large expansion joints have mechanical covers or proprietary joint systems fitted over them. Those are a specialist install in their own right. Our work is the sealant side: wall, panel and slab joints that are designed to be sealed.
Why car park joints fail
When we’re asked to look at a leaking or tired car park, the causes are usually a mix of these:
- Age and UV. Sealant on an exposed top deck or façade gets years of sun and weather. Eventually it hardens, cracks and stops moving with the joint.
- Loss of adhesion. If the joint wasn’t primed or cleaned properly first time, the sealant peels away from one face of the joint and water runs straight in behind it.
- Too much movement for the product. A joint sealed with something too rigid for the movement it sees will split down the middle.
- Wrong joint shape. A bead that’s too thick, or stuck to the back of the joint as well as the sides, can’t stretch properly. That’s what a backing rod or bond breaker tape is there to stop.
- Traffic and cleaning. On decks, tyres, turning wheels and pressure washing all wear exposed sealant down.
How we reseal car park joints properly
A good joint is mostly preparation. On a typical job we:
- Survey and measure. We walk the joints, note widths, depths and the condition of the edges, and agree with you which runs need replacing.
- Cut out the old sealant. All of it, back to clean concrete. New sealant over old won’t last.
- Clean and prime. Dust, laitance and loose material come off the joint faces, and we prime where the product calls for it.
- Set the depth. Backing rod or bond breaker tape goes in so the sealant only sticks to the two sides of the joint, not the back.
- Apply and tool. The right sealant for the job goes in and is tooled to a neat, consistent finish.
On vertical wall and panel joints we often use Arbo MP20, a one-part modified polymer sealant. On flat concrete floor and slab joints we use and apply Fosroc products, including two-part silicone where it suits. We also work with polyurethane and polysulphide sealants, and we’ll match the product to the joint, the movement and any specification you already have.
You can see the kind of slab finish we’re after on our concrete joint sealing page, and how we approach structural joints on our expansion joint sealing page.

A real example: Guildford multi-storey car park
From September to November 2024 we sealed roughly 1,250 linear metres of vertical and horizontal concrete wall joints at a train station multi-storey car park in Guildford. We used Arbo MP20 with bond breaker tape and primer, and reached the joints by boom lift, crane with man and basket, and scaffold tower. You can read more on the Guildford car park project page.
Planning joint work on a live car park
Most car parks can’t just shut. A few things make the work go smoothly:
- Phase it by level or zone. Coning off a section at a time keeps the rest of the car park open.
- Think about access early. Façade and stair tower joints often need a boom lift, cherry picker or scaffold tower. Our director holds IPAF and PASMA cards for powered access and mobile towers.
- Watch the weather. Sealant needs dry, clean joints and sensible temperatures, so outdoor joint work needs a bit of flexibility in the programme.
- Out-of-hours work. Where daytime closures aren’t practical, ask us about working outside normal hours.
We’re Constructionline Silver members, carry £10m Employer’s Liability and £5m Public Liability insurance, and provide RAMS on request.
FAQ
Can you reseal car park joints without closing the whole car park?
Usually, yes. We work through it in zones so most of the spaces stay in use. We’ll agree the phasing with you before we start.
Do you fit expansion joint covers?
No. Mechanical joint covers are a specialist product of their own. We seal the wall, panel and slab joints that are designed to take sealant.
How do I know if my car park joints need resealing?
Look for water coming through to the level below, sealant that’s cracked, split or peeled away from one side, and staining on soffits and walls under the joints.
Do you work outside Bedfordshire?
Yes. We cover Bedfordshire, Northamptonshire, London and within about 50 miles of Bedford, and travel further for larger commercial jobs.
Got a car park with failing joints?
Send us photos, drawings or a joint schedule and we’ll come back to you with a price. Call 01234 607 252, WhatsApp 07757 772 880, or use our contact page. For London jobs, see our London mastic contractor page.
Mastic and sealant work in London: we cover every London borough. See Mastic Man London or go straight to your area: North London · North-East London · East London · South-East London · South-West London · West London · Westminster & the City.
Insured & pre-qualified
For homeowners, builders and main contractors.
- £10m Employer’s LiabilityInsurance cover
- £5m Public Liability & Professional IndemnityInsurance cover
- Constructionline Silver member

- NVQ Level 2Sealant Applicator
Over 20 years in construction
Products we use
Sealants and adhesives we use on site.
Brand names and logos are trademarks of their respective owners and are shown to identify products we use. No endorsement is implied.
Got a joint that needs doing properly?
Call us, or send a few photos on WhatsApp for the quickest quote.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed
















