Arbomeric MP20 Grey – colour, uses & matching
Grey is the everyday colour of Arbomeric MP20 on concrete. We have used it on wall joints in car parks and large education buildings.
Grey in Arbomeric MP20
The manufacturer publishes colour names only, so these swatches are indicative and not taken from the maker. Screen colours differ from the real product. Check the official chart or ask for a sample.
Arbo lists Arbomeric MP20 in three colours: White, Black and Grey. MP20 is a one-part, high modulus modified polymer sealant that cures by moisture into a tough elastic rubber. Arbo formulated it for structural joints in heavy cladding, heavily trafficked floor joints and anti-vandal sealing.
Grey is the natural partner for in-situ and precast concrete. It is the colour we used for around 1,300 linear metres of wall joints on a multiversity project in Blackpool and around 1,250 linear metres in the multi-storey car park at Guildford station.
Typical uses for Grey
Concrete wall joints in car parks, stair cores and plant areas, precast panel joints on grey or unpainted concrete, and joints in heavy cladding. Grey MP20 is also used on secure or public sites where a tough, hard-to-pick bead is wanted.
What Grey sits well against
MP20 Grey suits precast concrete, in-situ concrete walls and car-park structures, where it blends with the concrete face. On a fair-faced concrete wall it is usually the least visible choice.
Matching tips
Compare the grey with the concrete when it is dry, because damp concrete looks much darker. On fair-faced concrete, a slightly darker bead usually looks neater than a lighter one, which can look like a gap. On car park and Guildford-type jobs we clean the joint, fit bond breaker tape, prime where the data sheet requires and tool to a smooth finish, so the colour reads evenly along the whole run.
Using Arbomeric MP20 in Grey: what the data sheet says
Arbo's high-modulus F-20 HM rating means MP20 resists deformation under load, which suits structural joints in heavy cladding and concrete. It is a one-part modified polymer, so there is no mixing. Arbo says it bonds to many substrates without primer in most cases, and that it resists most dilute acids and alkalis. Organic solvents may cause temporary swelling.
Shades to compare with Grey
- White
- Black
See all 3 Arbomeric MP20 colours
Similar colours from other ranges
Arbo product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Arbo products, but we are not the manufacturer, a stockist or an approved partner of Arbo. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Arbomeric MP20 Grey in London
Grey MP20 suits the exposed concrete in London car parks, cores and podiums. Guildford train station multi-storey car park is our reference for the method, and the same approach applies to concrete structures in Tower Hamlets or Southwark.
Arbomeric MP20 Grey questions
Is Arbomeric MP20 Grey a silicone?
No. MP20 is a modified polymer, so primers, compatibility and behaviour follow Arbo's MP20 data rather than general silicone rules.
Which is better on concrete, grey or black MP20?
Grey usually blends best on concrete walls. Black is common on trafficked floor joints where a lighter bead would show tyre and dirt marks.
Can you seal car park joints in MP20 Grey?
Yes. We seal wall and floor joints in multi-storey car parks and similar structures, working from boom lifts, cherry pickers and towers as needed. Send drawings or photos for a quote.
Want it sealed in Grey?
Concrete wall or car-park joints to reseal? Ask us about Arbomeric MP20 Grey.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











