Sikasil-825 Anthracite – colour, uses & matching
Anthracite is one of two very dark greys in the Sikasil-825 range. It is the slightly lighter, cooler alternative to Dark Anthracite RAL 7016.
Anthracite in Sikasil-825
Swatches are approximate colours sampled from the manufacturer's published colour card. Screen colours differ from the real product, so check the official chart or ask for a sample.
Sika lists both Anthracite and Dark Anthracite RAL 7016 for Sikasil-825. On the colour card Anthracite has a cooler, slightly blue-grey look and sits between Dark Grey and Dark Anthracite. Only the darker one carries a RAL number.
Having two anthracites is useful because "anthracite" frames vary a lot. Some grey windows and doors are close to RAL 7016, while others are lighter or bluer.
Typical uses for Anthracite
Dark grey aluminium and uPVC frames that are not exactly RAL 7016, slate-grey cladding panels, dark grey coping and flashing junctions, and joints in dark engineering brick are typical uses. It also suits dark grey composite doors.
What Anthracite sits well against
Sika's Anthracite is a dark charcoal grey, softer than black. It works against charcoal and dark grey powder-coated frames, dark fibre-cement and composite cladding, slate and blue engineering brick. It is not the same as the RAL 7016 shade in this range (that one has a cooler, bluer cast), so check which grey the frames are before you order.
Matching tips
If the frame specification says RAL 7016, start with Dark Anthracite RAL 7016 instead. Otherwise compare both anthracites against the frame in daylight. Dark beads show voids and uneven tooling less than pale ones, but they show white dust and smears more, so the frame and joint must be clean before sealing.
Using Sikasil-825 in Anthracite: what the data sheet says
Sikasil-825 bonds to powder-coated aluminium, uPVC, painted and unpainted timber, polycarbonate and many metals, which covers most modern window and cladding systems. Sika also lists lead, copper and zinc, so it can run along metal flashings next to dark cladding. On dark colours, careful masking and tooling matter more because smears show. Keep joint depth to half the width once the joint is 10 mm or more.
Shades to compare with Anthracite
- Dark Grey
- Dark Anthracite RAL 7016
- Black
See all 13 Sikasil-825 colours
Similar colours from other ranges
Sika product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Sika products, but we are not the manufacturer, a stockist or an approved partner of Sika. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Sikasil-825 Anthracite in London
Charcoal frames and dark cladding are common on new residential blocks in Greenwich and Lewisham. Anthracite perimeters suit those buildings, and we match to the frame colour on site.
Sikasil-825 Anthracite questions
Is Sikasil-825 Anthracite the same as RAL 7016?
No. Sika lists a separate Dark Anthracite RAL 7016. Anthracite is a slightly lighter dark grey without a RAL reference.
Which is better for grey windows, Anthracite or Dark Anthracite?
It depends on the frame. RAL 7016 frames usually suit Dark Anthracite RAL 7016. Lighter or bluer grey frames often suit Anthracite.
Can you match sealant to grey composite doors?
Yes. Send a photo of the door and frame in daylight and we will suggest the closest colour.
Want it sealed in Anthracite?
Charcoal frames or dark cladding to seal? Tell us the frame colour and lengths, and we will price it.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











