Sikasil-825 Black – colour, uses & matching
Black is the darkest of the 13 Sikasil-825 colours, for black frames, dark cladding and joints where a deep shadow line is wanted.
Black in Sikasil-825
Swatches are approximate colours sampled from the manufacturer's published colour card. Screen colours differ from the real product, so check the official chart or ask for a sample.
On Sika's colour card Black is a true black, darker than Dark Anthracite RAL 7016. In the Sikasil-825 range it completes the run of greys that starts at Mid Grey.
Black sealant has a practical side: it hides dirt and staining better than any other colour, which is why it is often chosen on busy commercial façades and ground-floor shopfronts.
Typical uses for Black
Black aluminium and uPVC frames, black powder-coated metalwork and balustrade bases, dark cladding and rainscreen junctions, and joints in black or very dark brick are the main uses. It also suits shadow-gap joints where the bead should read as a dark line.
What Black sits well against
Sika's Black is a deep, neutral black. It is right against black frames and black-painted steel, dark slate, black composite cladding and black rainwater goods, and on joints between dark glazing and black-framed curtain wall. On charcoal or 7016 frames, a black bead can look heavier than the frame, so compare it against Anthracite before deciding.
Matching tips
Black is less forgiving of a messy joint edge than people expect, because the contrast with lighter surroundings is strong. Masking tape gives a crisp line. If the frame is RAL 9005 Jet Black, Black is the natural choice. If it is a very dark grey, compare it with Dark Anthracite RAL 7016 first.
Using Sikasil-825 in Black: what the data sheet says
Black is common on glazing and curtain wall work, and Sika lists weather sealing of curtain walling, pre-formed panels and glass-to-aluminium joints for this product. Its alkoxy cure is neutral, so it does not attack metals. Sika also notes resistance to fumed hydrogen peroxide and formaldehyde once fully cured, which matters in some healthcare and lab settings. Dust shows on black, so clean and mask every joint first.
Shades to compare with Black
- Dark Grey
- Anthracite
- Dark Anthracite RAL 7016
See all 13 Sikasil-825 colours
Similar colours from other ranges
Sika product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Sika products, but we are not the manufacturer, a stockist or an approved partner of Sika. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Sikasil-825 Black in London
Black-framed glazing and black steelwork are popular on Shoreditch and Clerkenwell conversions. A black Sikasil-825 bead keeps those frames looking sharp.
Sikasil-825 Black questions
Is Sikasil-825 Black RAL 9005?
Sika lists it simply as Black, without a RAL reference. Against frames specified as RAL 9005, compare it with a RAL-coloured silicone first.
Does black sealant fade?
Exposure affects all sealants over time. Check Sika's data sheet for weathering performance, and replace any sealant that cracks or loses adhesion.
Can you seal black aluminium shopfronts?
Yes. We seal and reseal shopfront and curtain wall perimeters, often out of hours.
Want it sealed in Black?
Black frames, black steel or dark curtain wall? Send photos and lengths, and we will price a black reseal.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











