Sikasil HM White – colour, uses & matching
White Sikasil HM is the everyday colour for white baths, basins and shower trays, and the brightest of the two whites in Sika's sanitary range.
White in Sikasil HM
Swatches are approximate colours sampled from the manufacturer's published colour card. Screen colours differ from the real product, so check the official chart or ask for a sample.
Sikasil HM is Sika's acetoxy sanitary silicone, tested to ISO 11600 F/G20LM and BS EN 15651, with plus or minus 20% movement and a high viscosity for quick tooling. White is the first of its six colours.
On Sika's colour card it is a clean, bright white, with Limestone White as the softer alternative for cream tiles and older suites.
Typical uses for White
White baths, shower trays, basins and toilets against white or light tiles, white kitchen sinks and worktop upstands, and white wall panels are where White is used. It is the default for most new bathrooms with white sanitaryware.
What White sits well against
HM White is a bright sanitary white. It is the natural partner for white grout, white baths, basins and shower trays, and white gloss or matt wall tiles. Where the grout has aged to an off-white, or the tiles are cream or ivory, Limestone White or Jasmine usually blends in better than a brand-new bright white.
Matching tips
Match the sanitaryware first, then check the grout. If the bath is white but the grout is grey, White along the bath edge usually looks right and a grey bead looks like dirt. Acetoxy silicones like Sikasil HM release a vinegar smell while curing, so ventilate the room and leave it to cure before using the shower.
Using Sikasil HM in White: what the data sheet says
Sika makes this an acetoxy silicone with a strong anti-fungal additive, and quotes protection against mould, fungal and bacterial growth based on 10 years of accelerated ageing (ISO 22196 and AATCC 30 part 3). It takes ±20% movement. Sika also gives practical advice: fill deep voids with expanding foam and trim it level with the tray first, and fill an acrylic or plastic bath half full of water while sealing and during cure.
Shades to compare with White
- Limestone White
- Translucent
- Manhattan Grey
Similar colours from other ranges
Sika product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Sika products, but we are not the manufacturer, a stockist or an approved partner of Sika. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Sikasil HM White in London
Bright white bathrooms are standard in London rentals. Between tenancies in Wandsworth or Lambeth flats, we strip mouldy sealant and reseal in Sikasil HM White.
Sikasil HM White questions
How long before I can use the shower after resealing?
Follow the cure time on Sika's data sheet. As a rule, leave sanitary silicone at least 24 hours before it gets wet.
Why does white silicone go black?
Usually mould growing on soap and moisture on the surface or behind failed sealant. Sanitary silicones contain fungicide, but ventilation and cleaning still matter. Badly stained silicone is best cut out and replaced.
Do you reseal baths and showers?
Yes. We remove the old silicone completely, clean and dry the joint, and reseal.
Want it sealed in White?
Mouldy or split bath and shower sealant? We strip it, treat the joint and reseal in bright white.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











