Sikaflex PRO-3 Purform Grey – colour, uses & matching
Grey Sikaflex PRO-3 Purform is the colour we see most on concrete floors, because it blends with power-floated slabs in warehouses, factories and car parks.
Grey in Sikaflex PRO-3 Purform
The manufacturer publishes colour names only, so these swatches are indicative and not taken from the maker. Screen colours differ from the real product. Check the official chart or ask for a sample.
Sika's UK catalogue lists Sikaflex PRO-3 Purform in Black, Grey and White. It is a one-part, moisture-curing elastic polyurethane with Purform technology, aimed at floor joint sealing, with ultra-low monomer and VOC content.
The swatch here is indicative, because Sika publishes the colour name only. Concrete itself varies from pale to dark grey, so Grey is a blending colour rather than an exact match.
Typical uses for Grey
Saw-cut, construction and movement joints in warehouse and factory slabs, car park decks and ramps, loading bays, and joints between slabs and walls are the main uses. Some people know this product as "Sika Profin"; the Sika UK name is Sikaflex PRO-3.
What Grey sits well against
Grey is the everyday floor-joint colour. It blends with power-floated and broom-finished concrete slabs, grey screeds, concrete paving and car-park decks, where the joint disappears into the slab. On new, pale concrete it can look a shade darker at first, and the slab tends to darken towards it with use.
Matching tips
Compare the grey with dry concrete, because damp concrete looks much darker. On a heavily used floor, joints darken with tyre marks and dirt, so Grey ends up reading darker than it starts. Where joints are going to look dirty quickly, Black can be the more practical choice. Joint preparation matters more than colour: clean arrises, the right backing and primer where required.
Using Sikaflex PRO-3 Purform in Grey: what the data sheet says
Sika describes PRO-3 Purform as a one-part, moisture-curing polyurethane for floor and civil engineering joints. It quotes ±25% movement (ISO 9047), fast development of mechanical strength and an extended application range at lower temperatures, which helps on unheated warehouse floors. Sika also calls it non-staining to a wide range of substrates. With monomeric diisocyanate content under 0.1%, no REACH user training is needed.
Shades to compare with Grey
- Black
- White
See all 3 Sikaflex PRO-3 Purform colours
Similar colours from other ranges
Sika product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Sika products, but we are not the manufacturer, a stockist or an approved partner of Sika. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Sikaflex PRO-3 Purform Grey in London
Grey polyurethane is our default for basement car parks and service yards under London offices and flats, from the City fringe to Greenwich Peninsula.
Sikaflex PRO-3 Purform Grey questions
Is grey or black better for warehouse floor joints?
Grey blends with clean concrete. Black hides tyre marks and dirt. On busy forklift routes many clients choose Black.
Is Sikaflex PRO-3 a silicone?
No. Sika describes it as a polyurethane joint sealant. Polyurethanes have their own primers and properties.
Do you seal warehouse floor joints?
Yes. We cut out failed sealant, prepare the joints and reseal, phasing the work around a live site where needed.
Want it sealed in Grey?
Warehouse, factory or car park floor joints breaking up? Send the joint lengths and a few photos.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











