Arbomeric MP20 Black – colour, uses & matching
Black Arbomeric MP20 suits trafficked floor joints and tough anti-vandal sealing, where a dark bead hides dirt and marks.
Black in Arbomeric MP20
The manufacturer publishes colour names only, so these swatches are indicative and not taken from the maker. Screen colours differ from the real product. Check the official chart or ask for a sample.
Black is one of the three Arbomeric MP20 colours Arbo lists, with White and Grey. Arbo formulated MP20 as a one-part, high modulus modified polymer for heavy cladding, heavily trafficked floor joints and anti-vandal sealing.
On floors, a black joint stays looking tidy far longer than a grey one once tyres and trolleys have been over it.
Typical uses for Black
Trafficked floor joints in service yards, loading areas and car parks, anti-vandal sealing in public buildings and secure areas, joints next to black tarmac or dark paving, and dark cladding joints are typical uses.
What Black sits well against
MP20 Black suits dark cladding, black-painted steelwork and trafficked joints, where it hides dirt and rubber marks. It is also chosen in secure environments where a dark, anti-pick joint is specified to blend with dark fittings.
Matching tips
On floors, check the joint width and movement against Arbo's data sheet, because floor joints carry wheel loads as well as movement. Black shows pale dust and concrete slurry, so clean the joint surroundings before and after sealing. Where a floor joint needs a two-part silicone on flat concrete, we use Fosroc instead.
Using Arbomeric MP20 in Black: what the data sheet says
The anti-pick, anti-vandalism property is what sets MP20 apart. Arbo names prisons, secure units and high-security environments, where joints may be picked at by hand. In floors, its high modulus resists deformation under load. Because it is a modified polymer, not a silicone, primer selection and any later overcoating follow Arbo's data, not silicone rules.
Shades to compare with Black
- White
- Grey
See all 3 Arbomeric MP20 colours
Similar colours from other ranges
Arbo product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Arbo products, but we are not the manufacturer, a stockist or an approved partner of Arbo. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Arbomeric MP20 Black in London
Secure and high-traffic areas in London buildings, such as stair cores, back-of-house corridors and car park ramps, are where black anti-pick MP20 is chosen.
Arbomeric MP20 Black questions
Why use black MP20 on floors?
Black hides tyre marks and dirt, so trafficked joints stay looking tidy longer.
What is anti-vandal sealing?
Using a tough, high modulus sealant that is hard to pick out or damage, in places such as public toilets, stairwells and secure areas.
Do you seal car park and yard joints?
Yes. We seal wall and floor joints in car parks, yards and service areas.
Can MP20 be painted?
MP20 is a modified polymer, not a silicone, so it behaves differently from silicones when it comes to coatings. Whether a particular paint is suitable depends on the coating, so check Arbo's data and test first. We do not paint sealant joints as part of our work.
Want it sealed in Black?
Secure-unit, trafficked or cladding joints to seal in black? Send details of the building and access.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











