Arbomeric MP20 White – colour, uses & matching
White Arbomeric MP20 is the light version of Arbo's tough modified polymer sealant, for white or very pale panels and areas that need to look clean.
White in Arbomeric MP20
The manufacturer publishes colour names only, so these swatches are indicative and not taken from the maker. Screen colours differ from the real product. Check the official chart or ask for a sample.
Arbo lists Arbomeric MP20 in White, Black and Grey. MP20 is a one-part, high modulus modified polymer sealant that cures by moisture into a tough elastic rubber, formulated for heavy cladding joints, heavily trafficked floor joints and anti-vandal sealing.
It is not a silicone. That matters because modified polymers have different adhesion, primer and overpainting properties, so always follow Arbo's MP20 data sheet.
Typical uses for White
Joints in white or pale cladding panels, light-coloured precast, white-walled plant rooms and service areas, and public areas where a tough, hard-to-pick bead is wanted in a light finish are typical uses.
What White sits well against
MP20 White suits white and pale cladding panels, white-painted steel and pale precast, where a high-modulus joint is needed but a grey line would stand out. It is not a bathroom or window-board sealant. For those, a sanitary or low-modulus silicone is the better choice.
Matching tips
White shows dirt more than Grey or Black, so it suits walls rather than trafficked floors. On pale concrete, compare White with Grey, because concrete is rarely truly white. Clean, dry joints and neat masking make the biggest difference to how a white bead looks.
Using Arbomeric MP20 in White: what the data sheet says
Arbo describes Arbomeric MP20 as a one-part, high-modulus modified polymer meeting BS EN ISO 11600 F-20 HM. It is made for structural joints in heavy cladding, heavily trafficked floor joints, and anti-pick work in secure buildings. Arbo says it bonds to many substrates without primer in most applications, resists most dilute acids and alkalis, and may swell temporarily in organic solvents.
Shades to compare with White
- Black
- Grey
See all 3 Arbomeric MP20 colours
Similar colours from other ranges
Arbo product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Arbo products, but we are not the manufacturer, a stockist or an approved partner of Arbo. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Arbomeric MP20 White in London
White MP20 suits pale cladding and precast on London schemes where a tough joint is needed but grey would show. We plan access with the main contractor or building manager on sites across zones 1 and 2.
Arbomeric MP20 White questions
Is Arbomeric MP20 a silicone?
No. Arbo classes MP20 as a modified polymer sealant, so it is not a silicone and should not be treated like one when choosing primers.
Where is white MP20 used?
On pale panels and walls, and in public or service areas where a tough light-coloured bead is wanted.
Can you seal cladding joints in MP20?
Yes. We have used MP20 on large wall joint projects. Send drawings or photos for a quote.
Is MP20 the same as a silicone?
No. Arbo describes MP20 as a high-modulus modified polymer. It is stiffer than low-modulus silicones and is used where joints carry load or need anti-pick resistance, such as heavy cladding, trafficked floors and secure buildings.
Want it sealed in White?
Pale cladding or precast that needs a tough joint? Ask us about MP20 White.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











