Arbosil ONE Grey – colour, uses & matching
Grey Arbosil ONE is the all-round mid grey in Arbo's construction silicone range, for concrete, grey render, grey brick and mid-grey frames.
Grey in Arbosil ONE
The manufacturer publishes colour names only, so these swatches are indicative and not taken from the maker. Screen colours differ from the real product. Check the official chart or ask for a sample.
Arbo lists Grey alongside Light Grey, Anthracite and two RAL greys in the Arbosil ONE range, so there is a spread of greys to choose from.
Because Arbosil ONE is a low modulus, high-movement silicone, Grey is often used in movement joints in concrete and masonry as well as around frames.
Typical uses for Grey
Movement joints in concrete walls and precast panels, grey render and through-colour render junctions, grey engineering brick, and mid-grey window and door frames are the usual places for Grey.
What Grey sits well against
Arbo's Grey is a mid grey that works with grey uPVC and aluminium that has no exact RAL match, grey concrete and render, and grey masonry. Arbo also lists Light Grey, RAL 7016 and RAL 7022, so Grey is the middle step between pale frames and dark anthracite systems.
Matching tips
Concrete looks darker when damp, so judge Grey against dry surfaces. On fair-faced concrete a slightly darker joint usually looks neater than a lighter one. If the surface is pale, compare Grey with Light Grey. For grey frames with a RAL reference, compare with RAL 7016 or RAL 7022 first.
Using Arbosil ONE in Grey: what the data sheet says
Arbo says Arbosil ONE accommodates up to 50% movement in butt joints in brickwork, which suits the movement joints in block and brick walls. In concrete and render, the faces must be sound and free of laitance. Arbo's estimator shows a wide 25 × 10 mm joint uses one litre for about 4 m, so movement joints need noticeably more material than window perimeters.
Shades to compare with Grey
- Light Grey
- Anthracite
- RAL 7022
See all 15 Arbosil ONE colours
Similar colours from other ranges
Arbo product names and colour names belong to their manufacturer. Pioneer Sealants is an independent specialist sealant applicator. We use and apply Arbo products, but we are not the manufacturer, a stockist or an approved partner of Arbo. Colour lists were checked against the manufacturer's website on 9 October 2026 and may change.
Applying Arbosil ONE Grey in London
Grey render and concrete on post-war London blocks, in Southwark and Lambeth for example, suit a mid-grey movement-joint bead. Arbosil ONE Grey is one we use there.
Arbosil ONE Grey questions
Can Arbosil ONE Grey be used on concrete?
Arbosil ONE is a construction silicone used in many masonry and concrete joints. Check Arbo's data sheet for primers and substrate limits, especially on trafficked floors, where a polyurethane or modified polymer is usually used.
What is the difference between Grey and Light Grey?
Light Grey is paler. Arbo lists both for Arbosil ONE, so compare them against the surface.
Do you seal movement joints in concrete walls?
Yes. We cut out, prepare and reseal movement joints in concrete and precast walls.
Can Arbosil ONE be used on movement joints in blockwork?
Arbo lists long-term flexible sealing of movement joints in brickwork, with up to 50% movement in butt joints. Blockwork joints are treated the same way, with clean, sound faces and a correctly sized backing rod.
Want it sealed in Grey?
Grey masonry or render movement joints? We can reseal them in Arbosil ONE Grey.
- Opening hours
- Monday – Friday8:00am – 6:30pm
- Saturday9:00am – 4:00pm
- SundayClosed











